If you ’re concerned in customising your DualSense Edge but you ’re unsure where to start , here is our scout on removing the back push .
The DualSense Edge is one of the most customisable controllers ever developed by Sony , arrive with a superfluity of new features . But setting up your DualSense Edge accountant can be a little tricky , especially when you ’re adding on or take away forcible buttons .
gratefully , we have more than enough experience with the DualSense Edge to point you in the right-hand direction . If you ’re concerned in get wind how to hit and trade out the DualSense Edge back button , make certain you keep interpret , as we ’re going to be running through it in just a few simple footstep .
What you’ll need:
The Short Version
Step 1.
Flip your controller around
You will need to flip your controller around to get down the procedure since the buttons are on the back .
Step 2.
Gently pull on the back button
fascinate the back button between two finger and mildly start to draw it away from the restrainer . From our experience , pulling the button upward and towards the edge of the controller work good . Since they are attach magnetically , you will finger a little resistance as you pull , but it should not finger like you are damaging the accountant in the process . You may notice that remove the dome and lever feel different , and we recommend holding onto the edge of the lever tumbler button to correctly remove it .
Step 3.
Slide it out of the port
Once the push has disconnected from the port , you’re able to slither it away from the controller .
Troubleshooting
The DualSense Edge come with two distich of back buttons , in a dome and lever tumbler shape . They can be used in pairs or you’re able to desegregate and couple to see which frame-up works easily for you .
